My Panel Line Pen

PMKJ028

Panel lining is an essential process for giving plastic models a three-dimensional finish.
However, it can be difficult to find an inking pen in the perfect color to match the color of your plastic model.

[My Panel Line Pen] is an innovative pour-in type inking pen that allows you to fill the pen with paint of your choice to match the color of the plastic model kit you are making, allowing you to perform professional inking with the feel of a paint brush and the ease of use of a marker pen.
Made from a material that is resistant to enamel solvents, you can create an enamel paint inking pen that is easy to wipe off and redo.
You can also use it with pour-in adhesive.

Make your own inking pen with your favorite color
[My Panel Line Pen] is a pen that allows you to ink in the color you want to achieve your preferred finish.

When using, first dilute (5 times) the paint and solvent (ink) according to the marks on the dedicated measuring cup to create the ink.
Pour the ink you've created into the back of the pen, turn the knob on the side of the pen, and when the tip is completely saturated with the ink color, the setup is complete.

Once you set the color, you can apply shading to approximately 2-3 plastic model kits. The product comes in a pack of 3 and is available in multiple colors for versatile use.

*The ease with which the ink flows will vary depending on the color used and the temperature.
*Based on the dilution level in the dedicated measuring cup, add solvent as necessary to adjust the concentration to a flowable level.
*There is a risk of paint leaking from the inlet lid at the rear of the pen. Please make sure to tighten it securely before use.

Professional panel lining using capillary action
When you hold the tip of the brush against the mold of the plastic model you want to inscribe, the ink will flow and the inking process will begin.
The ink flows naturally into the grooves of the panel lines by capillary action, just like when using a paint brush to ink, resulting in an ideal finish.

The pen has a very fine tip, so it can easily be applied to tight or narrow areas. The flow rate varies depending on the type of ink and its dilution, so adjust the knob at an angle as you use it.
The material used is resistant to water-based and lacquer solvents as well as enamel solvents, making it possible to create an enamel paint inking pen that is easy to wipe off and redo.

*You can refill colors that have already been used, but you cannot use different colors with the same pen.

Built-in mixing ball to aid in mixing of paint
Since ingredients may separate after a certain period of storage, a metal stirring ball is included as standard.
By shaking the pen up and down, you can ensure that the paint is evenly mixed and released back into the pen.
If you forget to do something or need to ink a second time, just shake the pen to mix it up and open the knob to use it again. When the ink runs out, you can refill it with the same color of ink and use it again.

*If the main unit is stored for a long time, the paint may stick to the main unit and become difficult to stir. Please use it regularly as much as possible.
*When shaking the pen, make sure the knob and lid are closed before shaking it. Otherwise, paint may splash out from the tip of the pen.

Easy to store and clean up
By turning the knob on the side, you can stop the ink from leaking out, allowing you to store the pen while reducing the ink's evaporation.
The pen tip is made of a highly resilient material, so even if paint hardens with the tip still on it, it is unlikely to crack or become frayed. It can also be easily restored to its original shape by dissolving it in a parts cleaning solvent.
If stored for a long time, the tip will harden, so you will need to dissolve it in a solvent before using it.

*When storing, store the pen upright with the tip facing down. Any paint remaining on the tip may drip off and stain the handle.
*Be sure to wipe off any remaining paint from the tip of the pen before tightening the cap.

Compatible with pour-in adhesives
This product can also be used as an adhesive pouring pen.
By transferring the remaining pour-in adhesive with the eyedropper into the My Inking Pen, you can use up every last drop, making the gluing process smarter and more efficient.

*Since pour-in adhesive has a very low viscosity, it may flow out of the pen tip with force. You will need to tighten the knob on the side to reduce the flow rate.

Content

• 3x My panel line pen
• 1x measuring cup

Size

• Total length: approx. 16cm
• Diameter: Approx. 1.5cm
• Stirring ball: approx. φ5.5
• Measuring cup: approx. 26mm x 23mm

Precautions for use

• This product is not a marker pen. It is a brush product, so please handle and care for it in the same way as a general paint brush.
• Please use and store away from high temperatures, humidity, fire, and direct sunlight.
• Please prepare your own paint.
• When refilling, use the same color repeatedly.
• When storing, be careful not to forget to tighten the injection port cover or opening and closing knob.
• Due to the material used, the pen may be bent, but this is within specifications. Thank you for your understanding.
• Please refrain from using for purposes other than its intended purpose.
• Do not repair, disassemble or modify this product.
• Do not remove the ball (mixing ball) inside the pen.
• After use, wipe off any paint remaining on the tip of the pen and close the cap tightly.
• When refilling, pour slowly into the bottle. Otherwise the paint may come out too quickly and splash out.
• Do not disassemble the connection part in the center of the main unit, as this may cause the contents to leak.
• Do not shake the unit with the open/close knob open, as this may cause the contents to spill out.
• If left for a long period of time, the paint may harden and become unusable.
• Please note that paint may become difficult to apply due to changes in temperature.
• This product is a consumable item. To maintain its original performance, replace it with a new one periodically.
• If the product is deformed or damaged, stop using it immediately.
• Product specifications and appearance may be changed without notice.
• Do not give to small children as there is a risk of them swallowing or ingesting the product.
• Do not apply excessive force when handling this product as it may become deformed.
• Please note that we cannot be held responsible for any scratches or damage that may occur to the product when using this product.
• For product inquiries, please contact our customer support.